Model 1500 Roll Off Hoist Specifications

1015 Commercial Blvd. S.

Arlington, Texas 76001

Toll Free Within US: 1-800-654-5291

Local or Outside US: 817-467-9883

Fax: 817-472-5548

Product Quote

Parts Store

Home

Request Service

Warranty Claims

Model 1500 Roll Off Hoist

Specifications

Features

Specifications

Click the image above to see the large view of this dimensional drawing.

Standard Features	Model GH-1500-60,000 lb. Capacity (22 FT Box)
Cylinders	Interchangeable lift and reeving cylinders 6" bore x 79" stroke single stage
Fenders	Poly Fenders, replaceable and interchangeable
Air Shift PTO	With direct mounted pump
Hydraulic Tank	50 gal. capacity, side mounted steel
Frame	10" x 4" x ½" rectangular tubing
Lights	Enclosed sealed beam lights, mounted in rubber
Controls	Air/cable inside and outside of cab
Outside Rollers	4" O.D. x 3 ¾" long with Aluminum Bronze Bushings
Sheaves	10" diameter with Aluminum Bronze Bushings for longer life
Rear Hinge	Heavy-duty Steel with 32" pin surface
Grease Fittings	At all wear points
Lift Capacity	50,000 to 60,000 lbs
Dump Angle	Approximately 50 degrees
Operating Pressure	1900 P.S.I
Pump	66 G.P.M. @ 1500 R.P.M
Valve	Multiple Stack - 4 Way Sections
Filter	100 G.P.M. In-tank Return Line
Cycle Times	34 Seconds
Rear Hold Down	Ratchet Tie Downs
Wear Strips	1/2" X 3" bar

Chassis Specifications

Frame height – 41" to 45"

Recommended G.V.W.R. – 62,000 lbs.

Recommended rear G.V.W.R. – 44,000 lbs.

Recommended front G.V.W.R. – 18,000 lbs.

Cab to trunion – 170" to 180" (22 FT.) - 190" to 210" (24 FT.)

Truck frame shall be clear of side obstructions from 34" behind the cab to rear.

	Model GH-1560-60,000 lb. Capacity (22 FT Box)
The following specifications are the ONLY differences between the 1500 and 1560 Roll Off Hoists.
Cylinders	Interchangeable lift and reeving cylinders 7" bore x 79" stroke single stage
Cycle Times	39 Seconds